,

Santak Robust S Series UPS (650/850/1200/1500/2200VA)

Brand Santak
Series Robust S
Models RS650 / RS850 / RS1200 / RS1500 / RS2200
Power range 650–2200 VA / 390–1200 W
Topology Line Interactive
Voltage 230 VAC
SKU: SANTAK-SERIES-11 Categories: , Tag: Brand:

Product overview

Santak Robust S Series UPS (650/850/1200/1500/2200VA) is listed by Iwell for line-interactive UPS enquiries. The published specifications include Power range: 650–2200 VA / 390–1200 W. Compare both VA and W ratings, input/output voltage, connections and installation space. Specify the actual load and desired backup time when reviewing battery options.

Features

  • Microprocessor control ensures high reliability
  • Equipped with boost and buck automatic voltage regulator (AVR) to stabilize output voltage
  • Wide input voltage and frequency range, compatible with generators
  • Built-in DC start function to start the uninterruptible power supply (UPS) without AC power
  • Automatic charging even when the UPS is turned off
  • Automatic restart when the mains power is restored
  • Comprehensive protection against over-discharge, over-charge and overload
  • Equipped with VRLA Lead – acid battery

Santak Robust S selection and documents

Compare both VA and W ratings, input/output voltage, connections and installation space. Specify the actual load and desired backup time when reviewing battery options.

Use the specification table below and the Documents tab to review Robust S. Match the exact model or series configuration before ordering. Read the selection guidance.

Compare line-interactive UPS products or browse Santak product families. For a quotation, provide the complete model, quantity, destination and required configuration.

Technical specifications

Parameter RS650 RS850 RS1200 RS1500 RS2200
Power rating (VA/W) 650 VA/390 W 850 VA/480 W 1200 VA/600 W 1500 VA/900 W 2200 VA/1200 W
Product topology Line Interactive
Input — Voltage 230 VAC
Input — Voltage range 140–300 VAC 140–300 VAC 140–300 VAC 170–275 VAC 170–275 VAC
Input — Frequency >40 Hz (Auto sensing)
Output — Voltage 230 VAC
Output — Voltage regulation (battery mode) ±10%
Output — Frequency 50 Hz
Output — Waveform Modified sinewave
Output — Frequency regulation (battery mode) ±1 Hz
Output — Receptacles Universal ×2 Universal ×2 Universal ×4 Universal ×4 Universal ×4
Transfer time — Typical 4–8 ms
Battery — Type 12 V 7 Ah ×1 12 V 9 Ah ×1 12 V 7 Ah ×2 12 V 9 Ah ×2 12 V 9 Ah ×2
Battery — Recharge time 6 hours to 90% after complete discharge
Indicator — AC mode Green lighting
Indicator — Battery mode Yellow flashing
Indicator — Fault mode Red lighting
Audible — Backup mode Sounding every 10 seconds
Audible — Low battery Sounding every second
Alarm — Overload Sounding every 0.5 second
Alarm — Fault Continuously sounding
Protection — Full protection Discharge, overcharge, and overload protection
Physical — Dimensions (D×W×H), mm 297×101×142 297×101×142 370×138×165 370×138×165 370×138×165
Physical — Chassis material Plastic Plastic Metal (plastic front panel) Metal (plastic front panel) Metal (plastic front panel)
Net weight 4.75 kg 5.30 kg 8.85 kg 10.95 kg 11.30 kg
Operating environment 0–40°C, 0–90% relative humidity (non-condensing)
Noise level Less than 40 dB Less than 40 dB Less than 45 dB Less than 45 dB Less than 45 dB

Configuration & supply support

Share your equipment load, voltage, phase and target backup time. Iwell can recommend a configuration and provide a proposed product list, relevant documentation and a quotation.

Scroll to Top

Request a quotation

Tell us the product model, quantity and your requirements.

    We use your details to respond to your enquiry. Privacy information.